由 xushuhua 在 09-26-2003 14:52 发表:

在架构ftp服务器时出现问题

我的系统是redhat 9.0,在架构ftp服务器过程中出现如下问题：

[root@localhost root]# /etc/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

各位高手帮帮忙吧，多谢

由 juliaugong 在 09-26-2003 15:04 发表:

把你的vsftpd的配置文件贴出来看一下啊

域名注册，虚拟主机，企业邮局

国际域名68元/年，国内域名185元/年，注册或转移转入域名即送20M免费空间及10M免费邮箱

领先推出Windows2003＋IIS6.0＋Asp.Net虚拟主机

详情请登录http://www.xuanyu.cn

由 xsh 在 09-29-2003 21:13 发表:

向juliaugong求助

juliaugong,你好，我的vsftpd的配置文件如下：

Example config file /etc/vsftpd.conf

The default compiled in settings are very paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Allow anonymous FTP?

anonymous_enable=YES

Uncomment this to allow local users to log in.

local_enable=YES

Uncomment this to enable any form of FTP write command.

write_enable=YES

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

local_umask=022

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

#anon_upload_enable=YES

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

#anon_mkdir_write_enable=YES

Activate directory messages - messages given to remote users when they

go into a certain directory.

dirmessage_enable=YES

Activate logging of uploads/downloads.

xferlog_enable=YES

Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

#chown_uploads=YES

#chown_username=whoever

You may override where the log file goes if you like. The default is shown

below.

#xferlog_file=/var/log/vsftpd.log

If you want, you can have your log file in standard ftpd xferlog format

xferlog_std_format=YES

You may change the default value for timing out an idle session.

#idle_session_timeout=600

You may change the default value for timing out a data connection.

#data_connection_timeout=120

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

#async_abor_enable=YES

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

#ascii_upload_enable=YES

#ascii_download_enable=YES

#ftpd_banner=Welcome to blah FTP service.

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

#deny_email_enable=YES

(default follows)

#banned_email_file=/etc/vsftpd.banned_emails

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

#chroot_list_enable=YES

(default follows)

#chroot_list_file=/etc/vsftpd.chroot_list

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

pam_service_name=vsftpd

userlist_enable=YES

#enable for standalone mode

listen=YES

tcp_wrappers=YES

由 mingyue 在 09-30-2003 03:33 发表:

我的也是一样。

出现这种情况，再运行一次/etc/rc.d/init.d/vsftpd restart就ok了。

由 xsh 在 09-30-2003 14:31 发表:

再一次运行/etc/rc.d/init.d/vsftpd restart或/etc/init.d/vsftpd restart还是出现：

[root@localhost root]# /etc/rc.d/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

[root@localhost root]# /etc/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

[root@localhost root]#

[root@localhost root]# /etc/rc.d/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

[root@localhost root]# /etc/rc.d/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

[root@localhost root]# /ect/init.d/vsftpd restart

bash: /ect/init.d/vsftpd: 没有那个文件或目录

[root@localhost root]# /etc/init.d/vsftpd restart

关闭 vsftpd： [失败]

为 vsftpd 启动 vsftpd： [ 确定 ]

[root@localhost root]# /etc/init.d/vsftpd restart

关闭 vsftpd：

在架构ftp服务器时出现问题

Example config file /etc/vsftpd.conf

The default compiled in settings are very paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Allow anonymous FTP?

Uncomment this to allow local users to log in.

Uncomment this to enable any form of FTP write command.

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

Activate directory messages - messages given to remote users when they

go into a certain directory.

Activate logging of uploads/downloads.

Make sure PORT transfer connections originate from port 20 (ftp-data).

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

You may override where the log file goes if you like. The default is shown

below.

If you want, you can have your log file in standard ftpd xferlog format

You may change the default value for timing out an idle session.

You may change the default value for timing out a data connection.

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

You may fully customise the login banner string:

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

(default follows)

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

(default follows)

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

the presence of the "-R" option, so there is a strong case for enabling it.