由 askever 在 02-24-2004 10:26 发表:

求助:ftp服务器设置[vsftpd]

我现在的vsftp服务器谁都不能登陆了,配置文件如下:

Example config file /etc/vsftpd.conf

The default compiled in settings are very paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Allow anonymous FTP?

anonymous_enable=YES

no_anon_password=YES

Uncomment this to allow local users to log in.

local_enable=YES

Uncomment this to enable any form of FTP write command.

write_enable=YES

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

local_umask=002

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

#anon_upload_enable=YES

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

#anon_mkdir_write_enable=YES

Activate directory messages - messages given to remote users when they

go into a certain directory.

dirmessage_enable=YES

Activate logging of uploads/downloads.

xferlog_enable=YES

Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

chown_uploads=YES

chown_username=terry

You may override where the log file goes if you like. The default is shown

below.

#xferlog_file=/var/log/vsftpd.log

If you want, you can have your log file in standard ftpd xferlog format

xferlog_std_format=YES

You may change the default value for timing out an idle session.

#idle_session_timeout=600

You may change the default value for timing out a data connection.

#data_connection_timeout=120

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

#async_abor_enable=YES

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

#ascii_upload_enable=YES

#ascii_download_enable=YES

ftpd_banner=Welcome to Gwbnsh FTP service!

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

#deny_email_enable=YES

(default follows)

#banned_email_file=/etc/vsftpd.banned_emails

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

#chroot_list_enable=NO

(default follows)

#chroot_list_file=/etc/vsftpd.chroot_list

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

pam_service_name=vsftpd

userlist_enable=YES

#enable for standalone mode

listen=YES

tcp_wrappers=YES

anon_max_rate=400000

anon_root=/home/FTP/FTP2

local_enable=YES

max_clients=100

max_per_ip=5

请问有什么问题吗?

目录权限都是755,可是我现在本地用户不能登陆,anonymous也不行,总是提示输入密码,密码验证不通过,可是密码绝对正确,ssh下可以登陆系统,ftp跟目录的所有者是root,以前这样登陆过,后来改了一下配置后就不行了.

vsftpd 的服务我已开启, 有一个server和servies服务没有开启,不知道是否有关,请帮忙找找原因,253先了~

楼主阿,在遇到你之前，我对人世间是否有真正的圣人是怀疑的；而现在，我终于相信了！我曾经忘情于汉廷的歌赋，我曾经惊讶于李杜的诗才，我曾经流连于宋元的词曲；但现在，我才知道我有多么浅薄！

由 wongwong 在 02-24-2004 12:11 发表:

local_umask=002 ???

-->

求助:ftp服务器设置[vsftpd]

Example config file /etc/vsftpd.conf

The default compiled in settings are very paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Allow anonymous FTP?

Uncomment this to allow local users to log in.

Uncomment this to enable any form of FTP write command.

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

Activate directory messages - messages given to remote users when they

go into a certain directory.

Activate logging of uploads/downloads.

Make sure PORT transfer connections originate from port 20 (ftp-data).

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

You may override where the log file goes if you like. The default is shown

below.

If you want, you can have your log file in standard ftpd xferlog format

You may change the default value for timing out an idle session.

You may change the default value for timing out a data connection.

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

You may fully customise the login banner string:

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

(default follows)

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

(default follows)

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.