由 moke33 在 06-18-2004 22:28 发表:

vsftp服务器只能本机访问，外边的都不能访问

不知道是怎么回事，我是配置成xinetd启动方式，配置文件如下

这个是vsftpd.conf

==========================================

anonymous_enable=YES

Uncomment this to allow local users to log in.

local_enable=NO

Uncomment this to enable any form of FTP write command.

write_enable=NO

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

local_umask=022

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

anon_upload_enable=NO

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

anon_mkdir_write_enable=NO

anon_other_write_enable=NO

anon_world_readable_only=YES

Activate directory messages - messages given to remote users when they

go into a certain directory.

dirmessage_enable=YES

Activate logging of uploads/downloads.

xferlog_enable=YES

Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

hide_ids=YES

pasv_min_port=50000

pasv_max_port=60000

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

#chown_uploads=YES

#chown_username=whoever

You may override where the log file goes if you like. The default is shown

below.

#xferlog_file=/var/log/vsftpd.log

If you want, you can have your log file in standard ftpd xferlog format

#xferlog_std_format=YES

You may change the default value for timing out an idle session.

idle_session_timeout=120

one_process_model=YES

You may change the default value for timing out a data connection.

data_connection_timeout=300

accept_timeout=60

connect_timeout=60

anon_max_rate=500000

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

#async_abor_enable=YES

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

#ascii_upload_enable=YES

ascii_download_enable=NO

ftpd_banner=Welcome to Moke's FTP service.

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

#deny_email_enable=YES

(default follows)

#banned_email_file=/etc/vsftpd.banned_emails

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

#chroot_list_enable=YES

(default follows)

#chroot_list_file=/etc/vsftpd.chroot_list

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

#pam_service_name=vsftpd

#userlist_enable=YES

#enable for standalone mode

#listen=YES

#tcp_wrappers=YES

这个是/etc/xinetd.d/vsftpd

=================================

default: off

description: The vsftpd FTP server serves FTP connections. It uses \

normal, unencrypted usernames and passwords for authentication.

service ftp

{

socket_type = stream

wait = no

user = root

server = /usr/sbin/vsftpd

nice = 10

disable = no

flags = IPv4

per_source = 2

instances = 100

no_access = 192.168.1.3

log_on_success += PID HOST DURATION

log_on_failure += HOST

}

我从本机访问的时候，一切都好，其他的都不能访问，不知道怎么回事？

AMD AthlonXP1700+ + KingMax512DDR + 精英K7S5A3.X

NVIDIA GForce2 MX400

由剑心在 06-18-2004 22:30 发表:

是不是hosts.allow的问题？

知我者谓我心忧

不知我者谓我何求

由 tanmeng 在 06-18-2004 22:40 发表:

贴出提示看看

I believe, My chosen is ture!

由 dato 在 06-19-2004 00:34 发表:

如果是非RH系统，而且是从源码安装的话xinet方式启动

可以ftp 127.0.0.1

却无法ftp 192.168.1.3

vi /etc/hosts.allow 添加

vsftpd: ALL

然后

service xinetd restart

由 moke33 在 06-19-2004 09:41 发表:

我的是xinetd方式启动的,不是从源代码安装,我在试一试

AMD AthlonXP1700+ + KingMax512DDR + 精英K7S5A3.X

NVIDIA GForce2 MX400

由吾同树在 06-19-2004 15:38 发表:

listen_address=你的IP 加上这个！

你试试可以吗？

我也遇到过你的这样的问题后来吧我的IP地址加上就可以了！

风雨依旧吾同依旧

由 moke33 在 06-19-2004 21:36 发表:

上面的方法都试过了，不行啊，从我机子上访问可以，另外的机子就不行

我的ip是10.10.15.178

我从10.10.15.177都不能访问

我自己机子上用10.10.15.178或者127.0.0.1

都可以，真是郁闷啊

AMD AthlonXP1700+ + KingMax512DDR + 精英K7S5A3.X

vsftp服务器只能本机访问，外边的都不能访问

Uncomment this to allow local users to log in.

Uncomment this to enable any form of FTP write command.

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

Activate directory messages - messages given to remote users when they

go into a certain directory.

Activate logging of uploads/downloads.

Make sure PORT transfer connections originate from port 20 (ftp-data).

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

You may override where the log file goes if you like. The default is shown

below.

If you want, you can have your log file in standard ftpd xferlog format

You may change the default value for timing out an idle session.

You may change the default value for timing out a data connection.

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that turning on ascii_download_enable enables malicious remote parties

to consume your I/O resources, by issuing the command "SIZE /big/file" in

ASCII mode.

These ASCII options are split into upload and download because you may wish

to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

on the client anyway..

You may fully customise the login banner string:

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

(default follows)

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

(default follows)

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

default: off

description: The vsftpd FTP server serves FTP connections. It uses \

normal, unencrypted usernames and passwords for authentication.