由 lan97 在 07-07-2004 08:32 发表:
我的猫是USB接口的ADSL,芯片是Conexant,能在redhat9.0上网吗?
我的modem有两块芯片都是conexant
听说redhat9.0对USB接口的modem有特殊要求
请各位高手告诉小弟详细方法,不胜感激!!谢谢!!
由 wsgtrsys 在 07-07-2004 16:58 发表:
Type Card Driver Notes
ISA 3Com EtherLink III 3c509 3c509Notes
ISA 3Com 3c501 3c501
ISA 3Com ISA EtherLink XL 3c515
ISA 3Com 3c503 and 3c503/16 3c503
ISA 3Com EtherLink Plus (3c505) 3c505
ISA 3Com EtherLink 16 3c507
PCI "Corkscrew" 3Com EtherLink PCI III/XL, etc 3c59x
PCI PCI NE2000 cards, RealTEK RTL-8029, etc ne2k-pci
ISA NE1000 / NE2000 (non-pci) ne NE1000Notes
PCI EtherWORKS DE425 TP/COAX EISA, DE434 TP PCI, etc. de4x5
PCI Digital 21x4x Tulip PCI ethernet cards, etc. tulip
PCI Intel i82557/i82558 PCI EtherExpressPro eepro100
ISA Intel i82595 ISA EtherExpressPro10/10+ driver eepro
Intel EtherExpress 16 (i82586) eexpress
AMD LANCE/PCnetAllied Telesis AT1500, HP 2405A ,etc lance
PCI AMD PCnet32 and AMD PCnetPCI pcnet32
Apricot 680x0 VME, 82596 chipset 82596
Cabletron E2100 series ethercards e2100
Crystal LAN CS8900/CS8920 cs89x0
PCI Compaq Netelligent 10/100 TX PCI UTP, etc tlan
100VG-AnyLan Network Adapters, HP J2585B, J2585A, etc hp100
PCI VIA Rhine PCI Fast Ethernet, etc via-rhine
DIGITAL DEPCA & EtherWORKS,DEPCA, DE100, etc depca
PCI Digi Intl. RightSwitch SE-X EISA and PCI dgrs
EtherWORKS 3 (DE203, DE204 and DE205) ewrk3
Fujitsu FMV-181/182/183/184 fmv18x
HP PCLAN/plus hp-plus
HP LAN ethernet hp
ICL EtherTeam 16i/32 eth16i
MiCom-Interlan NI5010 ethercard ni5010
NI5210 card (i82586 Ethernet chip) ni52
NI6510, ni6510 EtherBlaster ni65
PCI RealTek cards using RTL8129 or RTL8139 chipsets rtl8139
ISA SMC Ultra and SMC EtherEZ ISA ethercard smc-ultra
SMC Ultra32 EISA ethernet card (32K) smc-ultra32
SMC 9000 series of ethernet cards smc9194
ISA PureData PDUC8028,WD8003 and WD8013 compatibles wd
PCI SiS 900 PCI sis900
AT1700/1720 at1700
EISA Ansel Communications EISA 3200 ac3200
PCI DM9102 PCI Fast Ethernet Adapter dmfe
EISA Mylex EISA LNE390A/B lne390
EISA Novell/Eagle/Microdyne NE3210 EISA ne3210
Racal-Interlan EISA ES3210 es3210
SMC EtherPower II epic100
Debugging is enabled with opts=ei_debug=4
PCMCIA is not supported in the kernel as yet.
The 'tulip' driver supports DEC 2114x chipset 10/100 PCI cards.
IPCop may not detect ISA network cards, though it is possible to use them. It may detect some.
Most generic ISA network cards are 'NE2000 compatible'. However, the set up utilities for many are manufacturer specific.
Internal modems supported
Type Card Notes
PCI Smartlink 5634PCV 5634PCVNotes
Listed above are cards that are known to work with IPCop. However, any 'hardware' based modem should work (which includes most ISA card modems). 'Winmodems' or 'software' modems will not work.
Internal ISDN cards supported
Not all cards supported by isdn4linux are supported by IPCop.
IPCop Users have reported that these cards work.
Type Card Model No
PCI BT Speedway ISDN
PCI Hayes Accura PCI ISDN
PCI Asuscom ISDNLink 128K P-IN100-ST-D
PCI AVM Fritz!Card PCI 1.0
Support for Fritz!Card PCI 2.0 is included in IPCop v1.4.0
ADSL USB/PCI Devices
Type Model IPcop Version
Pulsar DSL PCI V1.2 and later
Speedtouch USB Stingray V1.2 and later
Speedtouch USB 330 Rev 2.00 V1.3 and later
Speedtouch USB 330 Rev 4.00 V1.4 beta3 and later
ECI USB driver Aethra Starmodem, Archtek UGW-8000, Askey ALE070, Asus AAM6000UG,Atlantis Land I-Storm, Aztech 100U, BT Voyager, Cypress Globespan G7000,D-Link DSL200, Digicom MichelAngelo,Dy