1<nt-server-name>   
  2  
  3  
  4  
  5# Password Level allows matching of _n_ characters of the password for   
  6  
  7# all combinations of upper and lower case.   
  8  
  9; password level = 8   
 10  
 11; username level = 8   
 12  
 13  
 14  
 15# You may wish to use password encryption. Please read   
 16  
 17# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.   
 18  
 19# Do not enable this option unless you have read those documents   
 20  
 21; encrypt passwords = yes   
 22  
 23; smb passwd file = /etc/samba/smbpasswd   
 24  
 25  
 26  
 27# The following are needed to allow password changing from Windows to   
 28  
 29# update the Linux system password also.   
 30  
 31# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.   
 32  
 33# NOTE2: You do NOT need these to allow workstations to change only   
 34  
 35# the encrypted SMB passwords. They allow the Unix password   
 36  
 37# to be kept in sync with the SMB password.   
 38  
 39; unix password sync = Yes   
 40  
 41; passwd program = /usr/bin/passwd %u   
 42  
 43; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*   
 44  
 45  
 46  
 47# Unix users can map to different SMB User names   
 48  
 49; username map = /etc/samba/smbusers   
 50  
 51  
 52  
 53# Using the following line enables you to customise your configuration   
 54  
 55# on a per machine basis. The %m gets replaced with the netbios name   
 56  
 57# of the machine that is connecting   
 58  
 59; include = /etc/samba/smb.conf.%m   
 60  
 61  
 62  
 63# Most people will find that this option gives better performance.   
 64  
 65# See speed.txt and the manual pages for details   
 66  
 67socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192   
 68  
 69  
 70  
 71# Configure Samba to use multiple interfaces   
 72  
 73# If you have multiple network interfaces then you must list them   
 74  
 75# here. See the man page for details.   
 76  
 77; interfaces = 192.168.12.2/24 192.168.13.2/24   
 78  
 79  
 80  
 81# Configure remote browse list synchronisation here   
 82  
 83# request announcement to, or browse list sync from:   
 84  
 85# a specific host or from / to a whole subnet (see below)   
 86  
 87; remote browse sync = 192.168.3.25 192.168.5.255   
 88  
 89# Cause this host to announce itself to local subnets here   
 90  
 91; remote announce = 192.168.1.255 192.168.2.44   
 92  
 93  
 94  
 95# Browser Control Options:   
 96  
 97# set local master to no if you don't want Samba to become a master   
 98  
 99# browser on your network. Otherwise the normal election rules apply   
100  
101; local master = no   
102  
103  
104  
105# OS Level determines the precedence of this server in master browser   
106  
107# elections. The default value should be reasonable   
108  
109; os level = 33   
110  
111  
112  
113# Domain Master specifies Samba to be the Domain Master Browser. This   
114  
115# allows Samba to collate browse lists between subnets. Don't use this   
116  
117# if you already have a Windows NT domain controller doing this job   
118  
119; domain master = yes   
120  
121  
122  
123# Preferred Master causes Samba to force a local browser election on startup   
124  
125# and gives it a slightly higher chance of winning the election   
126  
127; preferred master = yes   
128  
129  
130  
131# Enable this if you want Samba to be a domain logon server for   
132  
133# Windows95 workstations.   
134  
135; domain logons = yes   
136  
137  
138  
139# if you enable domain logons then you may want a per-machine or   
140  
141# per user logon script   
142  
143# run a specific logon batch file per workstation (machine)   
144  
145; logon script = %m.bat   
146  
147# run a specific logon batch file per username   
148  
149; logon script = %U.bat   
150  
151  
152  
153# Where to store roving profiles (only for Win95 and WinNT)   
154  
155# %L substitutes for this servers netbios name, %U is username   
156  
157# You must uncomment the [Profiles] share below   
158  
159; logon path = \\\%L\Profiles\%U   
160  
161  
162  
163# All NetBIOS names must be resolved to IP Addresses   
164  
165# 'Name Resolve Order' allows the named resolution mechanism to be specified   
166  
167# the default order is "host lmhosts wins bcast". "host" means use the unix   
168  
169# system gethostbyname() function call that will use either /etc/hosts OR   
170  
171# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf   
172  
173# and the /etc/resolv.conf file. "host" therefore is system configuration   
174  
175# dependant. This parameter is most often of use to prevent DNS lookups   
176  
177# in order to resolve NetBIOS names to IP Addresses. Use with care!   
178  
179# The example below excludes use of name resolution for machines that are NOT   
180  
181# on the local network segment   
182  
183# - OR - are not deliberately to be known via lmhosts or via WINS.   
184  
185; name resolve order = wins lmhosts bcast   
186  
187  
188  
189# Windows Internet Name Serving Support Section:   
190  
191# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server   
192  
193; wins support = yes   
194  
195  
196  
197# WINS Server - Tells the NMBD components of Samba to be a WINS Client   
198  
199# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both   
200  
201; wins server = w.x.y.z   
202  
203  
204  
205# WINS Proxy - Tells Samba to answer name resolution queries on   
206  
207# behalf of a non WINS capable client, for this to work there must be   
208  
209# at least one WINS Server on the network. The default is NO.   
210  
211; wins proxy = yes   
212  
213  
214  
215# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names   
216  
217# via DNS nslookups. The built-in default for versions 1.9.17 is yes,   
218  
219# this has been changed in version 1.9.18 to no.   
220  
221dns proxy = no   
222  
223  
224  
225# Case Preservation can be handy - system default is _no_   
226  
227# NOTE: These can be set on a per share basis   
228  
229; preserve case = no   
230  
231; short preserve case = no   
232  
233# Default case is normally upper case for all DOS files   
234  
235; default case = lower   
236  
237# Be very careful with case sensitivity - it can break things!   
238  
239; case sensitive = no   
240  
241  
242  
243#============================ Share Definitions ==============================   
244  
245[homes]   
246  
247comment = Home Directories   
248  
249browseable = no   
250  
251writable = yes   
252  
253  
254  
255# Un-comment the following and create the netlogon directory for Domain Logons   
256  
257; [netlogon]   
258  
259; comment = Network Logon Service   
260  
261; path = /home/netlogon   
262  
263; guest ok = yes   
264  
265; writable = no   
266  
267; share modes = no   
268  
269  
270  
271  
272  
273# Un-comment the following to provide a specific roving profile share   
274  
275# the default is to use the user's home directory   
276  
277;[Profiles]   
278  
279; path = /home/profiles   
280  
281; browseable = no   
282  
283; guest ok = yes   
284  
285  
286  
287  
288  
289# NOTE: If you have a BSD-style print system there is no need to   
290  
291# specifically define each individual printer   
292  
293[printers]   
294  
295comment = All Printers   
296  
297path = /var/spool/samba   
298  
299browseable = no   
300  
301# Set public = yes to allow user 'guest account' to print   
302  
303guest ok = no   
304  
305writable = no   
306  
307printable = yes   
308  
309  
310  
311# This one is useful for people to share files   
312  
313;[tmp]   
314  
315; comment = Temporary file space   
316  
317; path = /tmp   
318  
319; read only = no   
320  
321; public = yes   
322  
323  
324  
325# A publicly accessible directory, but read only, except for people in   
326  
327# the "staff" group   
328  
329;[public]   
330  
331; comment = Public Stuff   
332  
333; path = /home/samba   
334  
335; public = yes   
336  
337; read only = yes   
338  
339; write list = @staff   
340  
341  
342  
343# Other examples.   
344  
345#   
346  
347# A private printer, usable only by fred. Spool data will be placed in fred's   
348  
349# home directory. Note that fred must have write access to the spool directory,   
350  
351# wherever it is.   
352  
353;[fredsprn]   
354  
355; comment = Fred's Printer   
356  
357; valid users = fred   
358  
359; path = /homes/fred   
360  
361; printer = freds_printer   
362  
363; public = no   
364  
365; writable = no   
366  
367; printable = yes   
368  
369  
370  
371# A private directory, usable only by fred. Note that fred requires write   
372  
373# access to the directory.   
374  
375;[fredsdir]   
376  
377; comment = Fred's Service   
378  
379; path = /usr/somewhere/private   
380  
381; valid users = fred   
382  
383; public = no   
384  
385; writable = yes   
386  
387; printable = no   
388  
389  
390  
391# a service which has a different directory for each machine that connects   
392  
393# this allows you to tailor configurations to incoming machines. You could   
394  
395# also use the %u option to tailor it by user name.   
396  
397# The %m gets replaced with the machine name that is connecting.   
398  
399;[pchome]   
400  
401; comment = PC Directories   
402  
403; path = /usr/pc/%m   
404  
405; public = no   
406  
407; writable = yes   
408  
409  
410  
411# A publicly accessible directory, read/write to all u</nt-server-name>