由 johnpanq 在 11-21-2002 09:14 发表:
**php不能下确显示
1<script>..</script>
脚本 **
Rh8下php不能下确显示java script 脚本,怎样才能正确显示呀?请教!
由 solaris 在 11-21-2002 11:32 发表:
你的问题提的太浅了,我们不知道你是PHP相应模块没有安装,还是配置上的错误。
由 johnpanq 在 11-21-2002 12:04 发表:
应该安装那些模块?多谢!
由 北南南北 在 11-21-2002 21:42 发表:
把配置文件发上来吧。。。有经验的弟兄就能改一改了。
多谢1`
===========================
请弟兄们发帖时要写个好标题,多谢!
===========================
每天以1000KM/H的速度在跑,感觉还是时间不够:(
“西学东渐,洋为中用” + 创造 = ?
linux ppc
由 johnpanq 在 11-22-2002 12:19 发表:
这是php.ini文件!多谢帮忙!
[PHP]
;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and NOT for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are case sensitive - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants after the line that loads the extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;
; Enable the PHP scripting language engine under Apache.
engine = On
; Allow the
tags are recognized. short_open_tag = On ; Allow ASP-style ``` ``` tags. asp_tags = Off ; The number of significant digits displayed in floating point numbers. precision = 14 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) y2k_compliance = Off ; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = Off ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "ob_gzhandler", output will be ; transparently compressed for browsers that support gzip or deflate encoding. ; Setting an output handler automatically turns on output buffering. output_handler = ; The unserialize callback function will called (with the undefind class' ; name as parameter), if the unserializer finds an undefined class ; which should be instanciated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func= ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; ; Note: output_handler must be empty if this is set 'On' !!!! ; zlib.output_compression = Off ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off ; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = On ; Safe Mode ; safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. safe_mode_exec_dir = ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. ; ;open_basedir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. safe_mode_protected_env_vars = LD_LIBRARY_PATH ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_functions = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; ``` would work. highlight.string = #CC0000 highlight.comment = #FF9900 highlight.keyword = #006600 highlight.bg = #FFFFFF highlight.default = #0000CC highlight.html = #000000 ; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 30 ; Maximum execution time of each script, in seconds memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; error_reporting is a bit-field. Or each number up to get desired error ; reporting level ; E_ALL - All errors and warnings ; E_ERROR - fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices ; ;error_reporting = E_ALL & ~E_NOTICE ; ; - Show only errors ; ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR ; ; - Show all errors except for notices ; error_reporting = E_ALL & ~E_NOTICE ; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error logging ; instead (see below). Keeping display_errors enabled on a production web site ; may reveal security information to end users, such as file paths on your Web ; server, your database schema or other information. display_errors = On ; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors = Off ; Log errors into a log file (server-specific log, stderr, or error_log (below)) ; As stated above, you're strongly advised to use error logging in place of ; error displaying on production web sites. log_errors = Off ; Store the last error/warning message in $php_errormsg (boolean). track_errors = Off ; Disable the inclusion of HTML tags in error messages. ;html_errors = Off ; String to output before an error message. ;error_prepend_string = "" ; String to output after an error message. ;error_append_string = "" ; Log errors to specified file. ;error_log = filename ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ; Warn if the + operator is used with strings. warn_plus_overloading = Off ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 ; The separator used in PHP generated URLs to separate arguments. ; Default is "&". ;arg_separator.output = "&" ; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&". ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input = ";&" ; This directive describes the order in which PHP registers GET, POST, Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to right, newer ; values override older values. variables_order = "EGPCS" ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. This makes most sense when coupled with track_vars - in which ; case you can access all of the GPC variables through the $HTTP_*_VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. register_globals = Off ; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = On ; Maximum size of POST data that PHP will accept. post_max_size = 8M ; This directive is deprecated. Use variables_order instead. gpc_order = "GPC" ; Magic quotes ; ; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc = On ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. magic_quotes_runtime = Off ; Use Sybase-style magic quotes (escape ' with '' instead of '). magic_quotes_sybase = Off ; Automatically add files before or after any PHP document. auto_prepend_file = auto_append_file = ; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype = "text/html" ;default_charset = "iso-8859-1" ; Always populate the $HTTP_RAW_POST_DATA variable. ;always_populate_raw_post_data = On ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root = ; The directory under which PHP opens the script using /~usernamem used only ; if nonempty. user_dir = ; Directory in which the loadable extensions (modules) reside. extension_dir = /usr/lib/php4 ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; cgi.force_redirect = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env = ; ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ;upload_tmp_dir = ; Maximum allowed size for uploaded files. upload_max_filesize = 2M ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; ; Whether to allow the treatment of URLs (like http:// or ftp:// ) as files. allow_url_fopen = On ; Define the anonymous ftp password (your email address) ;from="[email protected]" ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; Note that it should be the name of the module only; no directory information ; needs to go here. Specify the location of the extension with the ; extension_dir directive above. ;Windows Extensions ;Note that MySQL and ODBC support is now built in, so no dll is needed for it. ; ;extension=php_bz2.dll ;extension=php_ctype.dll ;extension=php_cpdf.dll ;extension=php_curl.dll ;extension=php_cybercash.dll ;extension=php_db.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_dbx.dll ;extension=php_domxml.dll ;extension=php_dotnet.dll ;extension=php_exif.dll ;extension=php_fbsql.dll ;extension=php_fdf.dll ;extension=php_filepro.dll ;extension=php_gd.dll ;extension=php_gettext.dll ;extension=php_hyperwave.dll ;extension=php_iconv.dll ;extension=php_ifx.dll ;extension=php_iisfunc.dll ;extension=php_imap.dll ;extension=php_ingres.dll ;extension=php_interbase.dll ;extension=php_java.dll ;extension=php_ldap.dll ;extension=php_mbstring.dll ;extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_ming.dll ;extension=php_mssql.dll ;extension=php_mysql.dll ;extension=php_oci8.dll ;extension=php_odbc.dll ;extension=php_openssl.dll ;extension=php_oracle.dll ;extension=php_pdf.dll ;extension=php_pgsql.dll ;extension=php_printer.dll ;extension=php_sablot.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_sockets.dll ;extension=php_sybase_ct.dll ;extension=php_tokenizer.dll ;extension=php_w32api.dll ;extension=php_xslt.dll ;extension=php_yaz.dll ;extension=php_zlib.dll ;Linux world ; extension=imap.so extension=ldap.so extension=mysql.so ;extension=odbc.so ;extension=pgsql.so ;extension=snmp.so ;extension=dbg.so ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [debugger] debugger.enabled = False ; enables dbg extension ; May cause problems when ; being acessed through a ; firewall, if the debugging ; port isn't allowed through ; hense it is off by default debugger.profiler_enabled = True ; enables dbg profiler debugger.JIT_enabled = True ; enables JIT sessions ; (auto-activated) debugger.JIT_port = 7869 ; default port to be used this ; should be the same as the ; port number opened by the ; dbg listener debugger.JIT_host = clienthost ; either real client IP or ; a keyword "clienthost" debugger.JIT_level = 3 ; JIT activation level ; 0 - disables JIT, ; 1 - E_CORE, ; 2 - E_CORE | E_ERROR | ; E_PARSE | ; E_COMPILE_ERROR | ; E_USER_ERROR ; 3 - E_ALL & ~(E_NOTICE | ; E_USER_NOTICE) ; 4 - E_ALL [Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling define_syslog_variables(). define_syslog_variables = Off [mail function] ; For Win32 only. SMTP = localhost ; For Win32 only. sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). sendmail_path = /usr/sbin/sendmail -t -i [Java] ;java.class.path = .\php_java.jar ;java.home = c:\jdk ;java.library = c:\jdk\jre\bin\hotspot\jvm.dll ;java.library.path = .\ [SQL] sql.safe_mode = Off [ODBC] ;odbc.default_db = Not yet implemented ;odbc.default_user = Not yet implemented ;odbc.default_pw = Not yet implemented ; Allow or prevent persistent links. odbc.allow_persistent = On ; Check that a connection is still valid before reuse. odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode = 1 [MySQL] ; Allow or prevent persistent links. mysql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mysql.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. mysql.max_links = -1 ; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysql.default_port = ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysql.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user = ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo cfg_get_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysql.default_password = [mSQL] ; Allow or prevent persistent links. msql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. msql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. msql.max_links = -1 [PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent = On ; Detect broken persistent links always with pg_pconnect(). Need a little overhead. pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. pgsql.max_links = -1 [Sybase] ; Allow or prevent persistent links. sybase.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. sybase.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybase.max_links = -1 ;sybase.interface_file = "/usr/sybase/interfaces" ; Minimum error severity to display. sybase.min_error_severity = 10 ; Minimum message severity to display. sybase.min_message_severity = 10 ; Compatability mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results according<br ```