由 zeroIIx 在 04-19-2003 15:14 发表:
vsftpd问题一个
220 欢迎来到个人FTP
USER anonymous
331 Please specify the password.
PASS xxxx
500 OOPS: chdir
我在网上查了一下,说是却少起始目录
怎么加这么目录,希望说的详细些
PS:vsftpd.conf
Example config file /etc/vsftpd.conf
The default compiled in settings are very paranoid. This sample file
loosens things up a bit, to make the ftp daemon more usable.
Allow anonymous FTP?
anonymous_enable=YES
Uncomment this to allow local users to log in.
local_enable=YES
Uncomment this to enable any form of FTP write command.
write_enable=YES
Default umask for local users is 077. You may wish to change this to 022,
if your users expect that (022 is used by most other ftpd's)
local_umask=022
Uncomment this to allow the anonymous FTP user to upload files. This only
has an effect if the above global write enable is activated. Also, you will
obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
Uncomment this if you want the anonymous FTP user to be able to create
new directories.
anon_mkdir_write_enable=YES
Activate directory messages - messages given to remote users when they
go into a certain directory.
dirmessage_enable=YES
Activate logging of uploads/downloads.
xferlog_enable=YES
Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
If you want, you can arrange for uploaded anonymous files to be owned by
a different user. Note! Using "root" for uploaded files is not
recommended!
chown_uploads=YES
chown_username=root
You may override where the log file goes if you like. The default is shown
below.
xferlog_file=/var/log/vsftpd.log
If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
You may change the default value for timing out an idle session.
idle_session_timeout=450
You may change the default value for timing out a data connection.
data_connection_timeout=90
It is recommended that you define on your system a unique user which the
ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
Enable this and the server will recognise asynchronous ABOR requests. Not
recommended for security (the code is non-trivial). Not enabling it,
however, may confuse older FTP clients.
async_abor_enable=YES
By default the server will pretend to allow ASCII mode but in fact ignore
the request. Turn on the below options to have the server actually do ASCII
mangling on files when in ASCII mode.
Beware that turning on ascii_download_enable enables malicious remote parties
to consume your I/O resources, by issuing the command "SIZE /big/file" in
ASCII mode.
These ASCII options are split into upload and download because you may wish
to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
on the client anyway..
ascii_upload_enable=YES
ascii_download_enable=YES
You may fully customise the login banner string:
ftpd_banner=欢迎来到个人FTP
You may specify a file of disallowed anonymous e-mail addresses. Apparently
useful for combatting certain DoS attacks.
#deny_email_enable=YES
(default follows)
#banned_email_file=/etc/vsftpd.banned_emails
You may specify an explicit list of local users to chroot() to their home
directory. If chroot_local_user is YES, then this list becomes a list of
users to NOT chroot().
#chroot_list_enable=YES
(default follows)
chroot_list_file=/etc/vsftpd.chroot_list
You may activate the "-R" option to the builtin ls. This is disabled by
default to avoid remote users being able to cause excessive I/O on large
sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#pam_service_name=vsftpd
#userlist_enable=YES
#enable for standalone mode
listen=YES
#tcp_wrappers=YES
由 neverdiechen 在 04-20-2003 00:46 发表:
你的/var/ftp下有没有目录,比如说默认的pub?
由 zeroIIx 在 04-20-2003 01:53 发表:
原来有的不过被我删除了，但是
后来我又重新建立过，可是还是
这样，对了，怎么把这个目录放到
/home/ftp/pub下
由 neverdiechen 在 04-20-2003 09:04 发表:
这个问题我也想知道
由 Snoopy 在 04-20-2003 10:26 发表:
ln就可以了,或是将登录的用户的默认目录是/home/ftp/pub
在/etc/passwd里设置!
And then in the evening light, when the bars of freedom fall
I watch the two of you in the shadows on the wall
How in the darkness steals some of the choices from my hand
Then will I begin to under
由 zeroIIx 在 04-20-2003 11:45 发表:
ok,谢谢
顺便问一下,怎么控制访问人数和个人带宽
由 Snoopy 在 04-20-2003 11:56 发表:
修改/etc/vsftpd/vsftpd.conf
新增底下两行
anon_max_rate=50000 这个是域名登录给它50k一秒
local_max_rate=200000 本地用户200k一秒
假设snoopy1 所能使用的最高速度为250KBytes/s
snoopy2 所能使用的最高速度为500KBytes/s
Step1. 修改/etc/vsftpd/vsftpd.conf
新增底下一行
user_config_dir=/etc/vsftpd/userconf
Step2. 新增一个目录：/etc/vsftpd/userconf
mkdir /etc/vsftpd/userconf
Step3. 在/etc/vsftpd/userconf 之下新增一个名为snoopy1的档案
内容增加一行：
local_max_rate=250000
Step4. 在/etc/vsftpd/userconf 之下新增一个名为snoopy2的档案
内容增加一行：
local_max_rate=500000
And then in the evening light, when the bars of freedom fall
I watch the two of you in the shadows on the wall
How in the darkness steals some of the choices from my hand
Then will I begin to under
由 zeroIIx 在 04-20-2003 12:46 发表:
我在/etc/vsftpd/vsftpd.conf
中将upload和anon_upload